350-401 Exam - Implementing and Operating Cisco Enterprise Network Core Technologies

certleader.com

Cause all that matters here is passing the Cisco 350-401 exam. Cause all that you need is a high score of 350-401 Implementing and Operating Cisco Enterprise Network Core Technologies exam. The only one thing you need to do is downloading Passleader 350-401 exam study guides now. We will not let you down with our money-back guarantee.

Free demo questions for Cisco 350-401 Exam Dumps Below:

NEW QUESTION 1

When a branch location loses connectivity, which Cisco FlexConnect state rejects new users but allows existing users to function normally?

  • A. Authentication-Down / Switch-Local
  • B. Authentication-Down / Switching-Down
  • C. Authentication-Local / Switch-Local
  • D. Authentication-Central f Switch-Local

Answer: A

Explanation:
This is because Cisco FlexConnect is a feature that allows wireless access points to operate in standalone mode when they lose connectivity to the wireless LAN controller. Cisco FlexConnect has different states depending on the status of the authentication and switching functions. Authentication-Down means that the access point cannot authenticate new users with the central server, such as a RADIUS server. Switch- Local means that the access point can switch the traffic locally without sending it to the wireless LAN controller. Therefore, Authentication-Down / Switch-Local is the state that rejects new users but allows existing users to function normally. The source of this answer is the Cisco ENCOR v1.1 course, module 7, lesson 7.3: Implementing FlexConnect.

NEW QUESTION 2

An engineer must configure a router to leak routes between two VRFs Which configuration must the engineer apply?
350-401 dumps exhibit
350-401 dumps exhibit

  • A. Option A
  • B. Option B
  • C. Option C
  • D. Option D

Answer: B

NEW QUESTION 3
DRAG DROP
Drag and drop the threat defense solutions from the left onto their descriptions on the right.
350-401 dumps exhibit


Solution:
350-401 dumps exhibit

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 4

Which method is used by an AP to join HA controllers and is configured in NVRAM?

  • A. stored WLC information
  • B. DNS
  • C. IP Helper Addresses
  • D. Primary/Secondary/Tertiary/Backup

Answer: A

Explanation:
An AP can be “primed” with up to three controllers—a primary, a secondary, and a tertiary. These are stored in nonvolatile memory so that the AP can remember them after a reboot or power failure.

NEW QUESTION 5

Which exhibit displays a valid JSON file?
350-401 dumps exhibit
350-401 dumps exhibit

  • A. Option A
  • B. Option B
  • C. Option C
  • D. Option D

Answer: D

NEW QUESTION 6

Refer to the exhibit.
350-401 dumps exhibit
An engineer entered the command no spanning-tree bpduguard enable on interface Fa 1/0/7. What is the effect of this command on Fa 1/0/7?

  • A. It remains in err-disabled state until the shutdown/no shutdown command is entered inthe interface configuration mode.
  • B. It remains in err-disabled state until the errdisable recovery cause failed-port-state command is entered in the global configuration mode.
  • C. It remains in err-disabled state until the no shutdown command is entered in the interface configuration mode.
  • D. It remains in err-disabled state until the spanning-tree portfast bpduguard disable command is entered in the interface configuration mode.

Answer: A

Explanation:
sw2#show errdisable recovery ErrDisable Reason Timer Status
----------------- --------------
arp-inspection Disabled bpduguard Disabled
channel-misconfig (STP) Disabled dhcp-rate-limit Disabled
dtp-flap Disabled gbic-invalid Disabled inline-power Disabled l2ptguard Disabled link-flap Disabled mac-limit Disabled
link-monitor-failure Disabled loopback Disabled
oam-remote-failure Disabled pagp-flap Disabled
port-mode-failure Disabled pppoe-ia-rate-limit Disabled psecure-violation Disabled security-violation Disabled sfp-config-mismatch Disabled storm-control Disabled
udld Disabled
unicast-flood Disabled sw2#

NEW QUESTION 7

350-401 dumps exhibit
Refer to the exhibit. External users require HTTP connectivity to an internal company web server that is listening on TCP port 8080. Which command set accomplishes this requirement?
A)
350-401 dumps exhibit
B)
350-401 dumps exhibit
C)
350-401 dumps exhibit
D)
350-401 dumps exhibit

  • A. Option A
  • B. Option B
  • C. Option C
  • D. Option D

Answer: B

NEW QUESTION 8

Which threat defence mechanism, when deployed at the network perimeter, protects against zero-day attacks?

  • A. intrusion prevention
  • B. stateful inspection
  • C. sandbox
  • D. SSL decryption

Answer: C

Explanation:
Reference: https://www.cisco.com/c/en/us/products/collateral/security/amp-appliances/datasheet-c78-733182.html“File analysis and sandboxing: Secure Malware Analytics’ highly secure environment helps you execute, analyze, and test malware behavior to discover previously unknown ZERO-DAY threats. The integration of Secure Malware Analytics’ sandboxing technology into Malware Defense results in more dynamic analysis checked against a larger set of behavioral indicators. “

NEW QUESTION 9
DRAG DROP
Drag and drop the characteristics from the left onto the routing protocols they describe on the right.
350-401 dumps exhibit


Solution:
350-401 dumps exhibit

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 10

What is a characteristic of Cisco StackWise technology?

  • A. It uses proprietary cabling
  • B. It supports devices that are geographically separated
  • C. lt combines exactly two devices
  • D. It is supported on the Cisco 4500 series.

Answer: C

NEW QUESTION 11

Refer to the exhibit.
350-401 dumps exhibit
Assuming the WLC's interfaces are not in the same subnet as the RADIUS server, which interface would the WLC use as the source for all RADIUS-related traffic?

  • A. the interface specified on the WLAN configuration
  • B. any interface configured on the WLC
  • C. the controller management interface
  • D. the controller virtual interface

Answer: A

NEW QUESTION 12

Refer to The exhibit.
350-401 dumps exhibit
Assuming that R1 is a CE router, which VRF is assigned to Gi0/0 on R1?

  • A. VRF VFN_A
  • B. VRF VPN_B
  • C. management VRF
  • D. default VRF

Answer: D

NEW QUESTION 13

Which protocol is implemented to establish secure control plane adjacencies between Cisco SD-WAN nodes?

  • A. IKF
  • B. TLS
  • C. IPsec
  • D. ESP

Answer: B

NEW QUESTION 14

Reter to the exhibit.
350-401 dumps exhibit
An administrator troubleshoots intermittent connectivity from internal hosts to an external public server. Some internal hosts can connect to the server while others receive an ICMP Host Unreachable message and these hosts change over time. What is the cause of this issue?

  • A. The translator does not use aOdress overloading
  • B. The NAT ACL does not match alt internal hosts
  • C. The NAT ACL and NAT pool share the same name
  • D. The NAT pool netmask rs excessively wide

Answer: B

NEW QUESTION 15

What are two characteristics of Cisco SD-Access elements? (Choose two.)

  • A. The border node is required for communication between fabric and nonfabric devices.
  • B. Traffic within the fabric always goes through the control plane node.
  • C. Fabric endpoints are connected directly to the border node.
  • D. The control plane node has the full RLOC-to-EID mapping database.
  • E. The border node has the full RLOC-to-EID mapping database.

Answer: AD

NEW QUESTION 16

Refer to the exhibit.
350-401 dumps exhibit
After an engineer configures an EtherChannel between switch SW1 and switch SW2, this error message is logged on switch SW2.
350-401 dumps exhibit
Based on the output from SW1 and the log message received on Switch SW2, what action should the engineer take to resolve this issue?

  • A. Configure the same protocol on the EtherChannel on switch SW1 and SW2.
  • B. Connect the configuration error on interface Gi0/1 on switch SW1.
  • C. Define the correct port members on the EtherChannel on switch SW1.
  • D. Correct the configuration error on interface Gi0/0 switch SW1.

Answer: A

Explanation:
In this case, we are using your EtherChannel without a negotiation protocol. As a result, if the opposite switch is not also configured for EtherChannel operation on the respective ports, there is a danger of a switching loop. The EtherChannel Misconfiguration Guard tries to prevent that loop from occuring by disabling all the ports bundled in the EtherChannel.

NEW QUESTION 17

350-401 dumps exhibit
Refer to the exhibit. An engineer constructs an EEM applet to prevent anyone from entering configuration mode on a switch. Which snippet is required to complete the EEM applet?

  • A. sync yes skip yes
  • B. sync no skip yes
  • C. sync no skip no
  • D. sync yes skip no

Answer: B

NEW QUESTION 18

An engineer is implementing a Cisco MPLS TE tunnel to improve the streaming experience for the clients of a video-on-demand server. Which action must the engineer perform to configure extended discovery to support the MPLS LDP session between the headend and tailend routers?

  • A. Configure the interface bandwidth to handle TCP and UDP traffic between the LDP peers
  • B. Configure a Cisco MPLS TE tunnel on both ends of the session
  • C. Configure an access list on the interface to permit TCP and UDP traffic
  • D. Configure a targeted neighbor session.

Answer: B

NEW QUESTION 19
......

Recommend!! Get the Full 350-401 dumps in VCE and PDF From Dumps-files.com, Welcome to Download: https://www.dumps-files.com/files/350-401/ (New 188 Q&As Version)