Want to know Ucertify 350-401 Exam practice test features? Want to lear more about Cisco Implementing and Operating Cisco Enterprise Network Core Technologies certification experience? Study Guaranteed Cisco 350-401 answers to Up to the immediate present 350-401 questions at Ucertify. Gat a success with an absolute guarantee to pass Cisco 350-401 (Implementing and Operating Cisco Enterprise Network Core Technologies) test on your first attempt.
Also have 350-401 free dumps questions for you:
NEW QUESTION 1
What is a characteristic of a type 2 hypervisor?
- A. ideal for data center
- B. complicated deployment
- C. ideal for client/end-user system
- D. referred to as bare-metal
Answer: A
NEW QUESTION 2
Refer to the exhibit Which configuration enables password checking on the console line, using only a password?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: B
NEW QUESTION 3
Which two new security capabilities are introduced by using a next-generation firewall at the Internet edge? (Choose two.)
- A. DVPN
- B. NAT
- C. stateful packet inspection
- D. application-level inspection
- E. integrated intrusion prevention
Answer: DE
NEW QUESTION 4
Refer to the exhibit.
The trunk does not work over the back-to-back link between Switch1 interface Giq1/0/20 and Switch2 interface Gig1/0/20. Which configuration fixes the problem?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: B
NEW QUESTION 5
DRAG DROP
Drag and drop the snippets onto the blanks within the code to create an EEM script that adds an entry to a locally stored text file with a timestamp when a configuration change is made. Not all options are used.
Solution:
Does this meet the goal?
- A. Yes
- B. Not Mastered
Answer: A
NEW QUESTION 6
Refer to the exhibit.
Extended access-list 100 is configured on interface GigabitEthernet 0/0 in an inbound direction, but it does not have the expected behavior of allowing only packets to or from 192.168.0.0/16. Which command set properly configures the access list?
- A. R1(config)#no access-list 100 seq 10 R1(config)#access-list 100 seq 40 deny ip any any
- B. R1(config)#ip access-list extended 100 R1(config-ext-nacl)#no 10
- C. R1(config)#no access-list 100 deny ip any any
- D. R1(config)#ip access-list extended 100 R1(config-ext-nacl)#5 permit to any any
Answer: A
NEW QUESTION 7
A company has an existing Cisco 5520 HA cluster using SSO. An engineer deploys a new single Cisco Catalyst 9800 WLC to test new features. The engineer successfully configures a mobility tunnel between the 5520 cluster and 9800 WLC. Client connected to the corporate WLAN roam seamlessly between access points on the 5520 and 9800 WLC. After a failure on the primary 5520 WLC, all WLAN services remain functional; however, Client roam between the 5520 and 9800 controllers without dropping their connection. Which feature must be configured to remedy the issue?
- A. mobility MAC on the 5520 cluster
- B. mobility MAC on the 9800 WLC
- C. new mobility on the 5520 cluster
- D. new mobility on the 9800 WLC
Answer: B
NEW QUESTION 8
Refer to the exhibit. An engineer attempts to configure a router on a stick to route packets between Clients, Servers, and Printers; however, initial tests show that this configuration is not working. Which command set resolves this issue?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: C
Explanation:
We must reconfigure the IP address after assigning or removing an interface to a VRF. Otherwise that interface does not have an IP address.
NEW QUESTION 9
What is difference between TCAM and the MAC address table?
- A. TCAM is used to make Lalyer 2 forwarding decisions CAM is used to build routing tables.
- B. The MAC address table supports partial matches .TCAM requires an exact match.
- C. The MAC address table is contained in CAM.ACL and QoS information is stored in TCAM.
- D. Router prefix lookups happens in CAM.MAC address table lookups happen in TCAM.
Answer: D
NEW QUESTION 10
A script contains the statement "while loop != 999:" Which value terminates the loop?
- A. A value equal to 999.
- B. A value less than or equal to 999.
- C. A value not equal to 999.
- D. A value greater than or equal to 999.
Answer: A
NEW QUESTION 11
What are two characteristics of vManage APIs? (Choose two.)
- A. Southbound API is based on OMP and DTLS.
- B. Northbound API is RESTful, using JSON.
- C. Northbound API is based on RESTCONF and JSON.
- D. Southbound API is based on NETCONF and XML.
- E. Southbound API is based on RESTCONF and JSON.
Answer: BD
NEW QUESTION 12
Refer to the exhibit.
An engineer configures a new WLAN that will be used for secure communications; however, wireless clients report that they are able to communicate with each other. Which action resolves this issue?
- A. Enable Client Exclusions.
- B. Disable Aironet IE
- C. Enable Wi-Fi Direct Client Policy
- D. Enable P2P Blocking.
Answer: D
NEW QUESTION 13
DRAG DROP
Drag and drop the characteristics from the left onto the routing protocol they describe on the right
Solution:
Does this meet the goal?
- A. Yes
- B. Not Mastered
Answer: A
NEW QUESTION 14
Which three elements determine Air Time efficiency? (Choose three)
- A. evert-driven RRM
- B. data rate (modulation density) or QAM
- C. channel bandwidth
- D. number of spatial streams and spatial reuse
- E. RF group leader
- F. dynamic channel assignment
Answer: BCD
Explanation:
https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2020/pdf/BRKEWN- 3010.pdf
NEW QUESTION 15
DRAG DROP
Drag and drop the characteristics from the left onto the technology types on the right.
Solution:
Orchestration
Orchestration means arranging or coordinating multiple systems. It’s also used to mean “running the same tasks on a bunch of servers at once, but not necessarily all of them.” Configuration Management
Config Management is part of provisioning. Basically, that’s using a tool like Chef, Puppet or Ansible to configure our server. “Provisioning” often implies it’s the first time we do it. Config management usually happens repeatedly.
Configuration management (CM) is a systems engineering process for establishing and maintaining consistency of a product’s performance, functional, and physical attributes with its requirements, design, and operational information throughout its life Configuration management is all about bringing consistency in the infrastructure.
Configuration Orchestration vs Configuration Management
The first thing that should be clarified is the difference between “configuration orchestration” and “configuration management” tools, both of which are considered IaC tools and are included on this list.
Configuration orchestration tools, which include Terraform and AWS CloudFormation, are designed to automate the deployment of servers and other infrastructure. Configuration management tools like Chef, Puppet, and the others on this list help configure the software and systems on this infrastructure that has already been provisioned.
Does this meet the goal?
- A. Yes
- B. Not Mastered
Answer: A
NEW QUESTION 16
DRAG DROP
Drag and drop the characteristics from the left onto the infrastructure deployment models they describe on the right.
Solution:
Does this meet the goal?
- A. Yes
- B. Not Mastered
Answer: A
NEW QUESTION 17
DRAG DROP
Drag and drop the LIPS components on the left to the correct description on the right.
Solution:
Does this meet the goal?
- A. Yes
- B. Not Mastered
Answer: A
NEW QUESTION 18
Refer to the exhibit. Which action completes the configuration to achieve a dynamic continuous mapped NAT for all users?
- A. Configure a match-host type NAT pool
- B. Reconfigure the pool to use the 192.168 1 0 address range
- C. Increase the NAT pool size to support 254 usable addresses
- D. Configure a one-to-one type NAT pool
Answer: C
NEW QUESTION 19
......
100% Valid and Newest Version 350-401 Questions & Answers shared by Thedumpscentre.com, Get Full Dumps HERE: https://www.thedumpscentre.com/350-401-dumps/ (New 188 Q&As)